Goof Off Cleans What Ordinary Cleaners Can’t

Pro Strength For Your Home,
Garage & Workshop

The Fast, Easy Way To Remove Tough Stains

The Professional Way To Clean Your Workplace

Life is messy, but cleaning up even the toughest stains can be fast and easy with Goof Off.  Remember, Goof Off works the first time on the kinds of spots and stains ordinary cleaners can't handle.

Here are some key points to keep in mind when dealing with spots and stains.
 

 

  1. Remove stains as quickly as possible to help prevent them from setting.
  2. Each stain is different and needs to be treated differently.
  3. Always consider the surface the stain is on — fabric, clothing, upholstery, hard surfaces, etc. This helps determine treatment.
  4. Handle stained material carefully, so as not to spread or deepen the stain.
  5. It's wise to pre-test any stain remover in an inconspicuous area first.


Looking for specific solutions to your spot and stain problems?
Just rollover any of the stains below for a fast, easy, detailed solution.   And don’t forget, when life's messy mistakes happen, don't panic, reach for Goof Off.

 

Graffiti

Shake well:
  1. Apply Goof Off™ Pro Strength Graffiti Remover to a cloth
  2. Rub over offending marks. If the graffiti isn't completely removed…
  3. Choose a small test area and apply a small amount of Goof Off™ directly to the surface
  4. Use a natural fiber brush or Teflon®-safe pad to loosen marks
  5. Blot, rinse or power wash the residue away
Dried Latex Paint

Always use safety goggles. People with sensitive skin should use solvent resisent gloves:
  1. Apply Goof Off™ Pro Strength Remover to a cloth
  2. Blot, rub lightly until spot is removed
  3. You may need to rewax some surfaces to renew gloss
Always test on an inconspicuous area first
Coffee Stains

  1. Blot up any excess liquid first
  2. Spray Goof Off™ Heavy Duty Remover on the stain
  3. Wait a few minutes for it to penetrate, then blot it up
Always test on an inconspicuous area first
Super Glue Epoxy/Gorilla Glue Residue

Always use safety goggles:

People with sensitive skin should use solvent resistant gloves

  1. Apply Goof Off™ Super Glue Remover to the glue residue with a cloth or paper towel
  2. Wait a few moments to penetrate and dissolve
  3. Wipe surface clean
Always test on an inconspicuous area first
Decal, Sticker and Adhesive Residue

  1. Spray on Goof Off™ Heavy Duty Remover on the stain
  2. Let the residue dissolve and wipe it away
Always test on an inconspicuous area first
Road Tar on your Vehicle

Apply full strength. Product should not be diluted:
  1. Apply Goof Off™ Power Cleaner & Degreaser
  2. Allow Goof Off™ to penetrate for a couple of minutes
  3. Wipe off with a clean, absorbent cloth
Always test on an inconspicuous area first
Automotive Oil/Fluid Stains
For motor oil, lube, machine grease, hydraulic fluids and other petroleum product stains on hard surfaces:

  1. Apply Goof Off™ Heavy Duty stain remover directly to the oil
  2. Agitate it with a stiff brush
  3. Wipe away the stain
Always test on an inconspicuous area first
Household Oils
Cooking oils, baby oil, suntan lotion, furniture treatments, massage oils, etc.

  1. Apply Goof Off™ Heavy Duty stain remover to a cloth or paper towel
  2. Blot or wipe up the oil — it's safe for most surfaces, environmentally-friendly and no harsh fumes
  3. Wipe the mess away
Always test on an inconspicuous area first
Tree Sap

  1. Apply Goof Off™ Heavy Duty Remover
  2. Watch it dissolve sticky messes like tar and sap
  3. Wipe the mess away
Always test on an inconspicuous area first
Bathroom Rust

Wearing rubber gloves:

  1. Spray Goof Off™ Rust Stain Remover directly to the rust stain
  2. Let stand for 20-30 seconds while it dissolves the rust, calcium, and lime
  3. Wipe away rust with a damp cloth
  4. Rinse
Always test on an inconspicuous area first
Toilet Stains

For use in toilet tanks only. Do not mix with bleach or any other household cleaner. Do not use with other in-tank cleaners.

  1. Remove the water from your toilet
  2. Spray Goof Off™ Rust Stain Remover on the stains and watch them vanish
  3. Flush
  4. Wipe the mess away
Rust on Tools

  1. Apply Goof Off™ Rust Stain Remover Outdoor to the tools
  2. Wait for calcium, lime, and rust to dissolve
  3. Wipe away rust with a damp cloth
  4. Rinse or wipe dry
Wear eye protection and rubber gloves during use. Always test on an inconspicuous area first
Glue

  1. If the glue has not yet dried, wipe off as much of it as possible, carefully, so as not to spread it over a bigger area
  2. Spray Goof Off™ Heavy Duty Remover directly on the problem
  3. Wait for it to penetrate — and wipe away residue
Always test on an inconspicuous area first
Ink

  1. Use a paper towel to remove as much ink as possible before it dries
  2. Apply Goof Off™ Heavy Duty Remover to the stain
  3. Blot or wipe away — repeat as necessary
Always test on an inconspicuous area first
Marker Stains

  1. Apply Goof Off™ Heavy Duty Remover directly to the stain
  2. Allow to penetrate for a couple of minutes
  3. Wipe off with a clean, absorbent cloth
Always test on an inconspicuous area first
Caulk

  1. Apply Goof Off™ Foam & Caulk Remover directly to the caulk
  2. Allow solvents to dissolve
  3. Clean with a scraper, cloth or paper towel